PDA

View Full Version : 2003 red Mustang SVT Cobra - supercharged, 6 speed, 100k mile warranty, $19,999obo



DNeinstadt
04-09-2010, 03:30 PM
2003 Cobra Coupe
Torch Red (1 of 212 with the charcoal interior)
33,xxx miles on car
Less than 500 miles on motor (put in at 33,500)
Charcoal gray interior with gray alacantra (microfiber type) seat inserts
AC blows very cold, recently serviced
Brand new serpentine belts (both of them)

BRAND NEW ford longblock with 100,000 mile/3 year warranty - have paperwork, good at ANY Ford Dealer (Registered by the VIN #)
6 speed manual transmission
BRAND NEW Ford clutch, pressure plate, clutch fork, pilot bushing, and throwout bearing
Stock flywheel freshly turned with new motor

Mods:
Magnaflow catback
H&R Lowering springs
aftermarket shortened black antenna
FR500 wheels, 17x9 in front, 17x10.5 in rear. Black with polished lip, deep dish in rear.
Newer Nitto Extreme tires up front (255/40/17), rear tires (315/35/17) - currently has Nitto 555R
Tinted windows, tail lights, & brake light
IRS Low profile Subframe bolts
Duralast Alternator (lifetime warranty)
BRAND NEW Drilled & slotted rotors, BRAND NEW Evolution ceramic pads
Black metal bumper inserts

Available with car sale:
stock springs
Good condition BF Goodrich 275/40/17 tires

Now for the bad news:
- Prior owner damaged the OLD motor, it had a knocking when I bought it, instead of taking a chance on fixing it, I decided to completely replace the motor with a new one.
- Paint is about 9 out of 10. There are some spots that have been repainted and in some areas the paint didn't completely cover. It is not bad at a short distance, I just want to be up front so there are no dissapointments. It was recently detailed by a professional but there are some scratches on the roof panel from the prior owner's antennas. There are misc small chips on the car and a few scratches here and there.
- Console has a hole for switches for stereo, neon, etc. Switches & neon have been removed but the holes remain.

Asking price is $21,000 or make an offer. I am considering trades + cash. The more cash the better of course but depends on what is traded.

Pics:

http://www.3lduratec.com/dan/cobra/pass.JPG
http://www.3lduratec.com/dan/cobra/rearpass.JPG
http://www.3lduratec.com/dan/cobra/passcorner.JPG
http://www.3lduratec.com/dan/cobra/driver.JPG
http://www.3lduratec.com/dan/cobra/engine.JPG
http://www.3lduratec.com/dan/cobra/interior.JPG
http://www.3lduratec.com/dan/cobra/interior2.JPG
http://www.3lduratec.com/dan/cobra/brakes.JPG

http://www.3lduratec.com/dan/cobra/trunk.JPG
http://www.3lduratec.com/dan/cobra/gauges.JPG

UPDATE -

I had a professional help me detail it, and we got most of the scratches out including most of the ones on the roof.
I had an additional key made for the car. I have two working keys and fobs for it.
I have been driving it for a while now and it drives nice. The only complaint I have is that the ceramic brake pads squeal with light braking. I have 2 sets of front Brembo pads that can go with the car if wanted. I am not sure if they squeal less or not.
I purchased and mounted the front license plate bracket. I figured as long as the holes were already drilled, I might as well put the bracket on the front.

I am still looking for $21,000 for this fine automobile. Here are some newer pictures.

DNeinstadt
04-09-2010, 03:30 PM
BUMP -
I had a professional help me detail it, and we got most of the scratches out including most of the ones on the roof.
I had an additional key made for the car. I have two working keys and fobs for it.
I have been driving it for a while now and it drives nice. The only complaint I have is that the ceramic brake pads squeal with light braking. I have 2 sets of front Brembo pads that can go with the car if wanted. I am not sure if they squeal less or not.
I purchased and mounted the front license plate bracket. I figured as long as the holes were already drilled, I might as well put the bracket on the front.

I am still looking for $21,000 for this fine automobile. Here are some newer pictures.
http://www.3lduratec.com/dan/cobra/April2010/pass.jpg
http://www.3lduratec.com/dan/cobra/April2010/driverside.jpg
http://www.3lduratec.com/dan/cobra/April2010/driverrear.jpg
http://www.3lduratec.com/dan/cobra/April2010/driverrear2.jpg
http://www.3lduratec.com/dan/cobra/April2010/passangle.jpg
http://www.3lduratec.com/dan/cobra/April2010/frontangle.jpg
http://www.3lduratec.com/dan/cobra/April2010/front.jpg
http://www.3lduratec.com/dan/cobra/April2010/back.jpg

SnakeByte
04-09-2010, 05:16 PM
Sorry, but I hate that Color, and why did you take neon off..........:nuts:

TF2v97SN
04-09-2010, 05:34 PM
i knew it was only a matter of time before this showed up

Budderigs
04-09-2010, 06:44 PM
so how much would you knock off for both the wrx and thundercoug? :uhoh:

DNeinstadt
04-09-2010, 08:52 PM
Not enough Bud! :)

Budderigs
04-10-2010, 12:48 AM
if we get it down in the 10's range I might be able to afford it... :uhoh:

DNeinstadt
04-10-2010, 06:59 AM
LOL, it won't get too far into the 10's range, maybe very very high 10's....

No1Ford
04-11-2010, 08:33 AM
I'll buy the smoked tail lights ,or trade?

DNeinstadt
04-11-2010, 03:01 PM
Uh, no.

SnakeByte
04-11-2010, 05:52 PM
Yeah, since you're now parting it out, how much you need just for the motor?............:think:

DNeinstadt
05-05-2010, 09:59 AM
$19,999 obo.

DNeinstadt
06-03-2010, 10:23 PM
And SOLD.

SVTL919
06-04-2010, 04:42 AM
glad you sold it. anyone local? what is the next project?

Stilz
06-04-2010, 05:31 AM
:headbang: congrats on the sale! I thought it would be out there forever.

DNeinstadt
06-04-2010, 06:59 AM
Nobody local. No ADDITIONAL projects other than the ones I already have. :)

I was starting to wonder myself if it was going to be a keeper!

66gtk
06-04-2010, 07:45 AM
Congratulations on the sale. Now you can rest easy for a while...

drop top
06-04-2010, 08:11 AM
:trucker:

DNeinstadt
06-04-2010, 12:27 PM
For a while......... :)

HMMRDWN
06-04-2010, 04:24 PM
So are ya celebrating?

DNeinstadt
06-04-2010, 05:11 PM
Yep, I'll be celebrating by washing the two remaining Mustangs. They are gonna be feelin' the love!

ShelbyJoe
06-06-2010, 11:46 PM
Congrats Dan.



Has Michelle let you off the couch yet? :eek2:

lujan281sc
06-30-2010, 12:45 AM
Is this Mustang still for sale?

Jakestowing&recovery
06-30-2010, 05:35 AM
And SOLD.


Is this Mustang still for sale?

My guess would be no.

DNeinstadt
06-30-2010, 07:03 AM
No longer for sale locally, it got shipped off to VA.