Apple Valley Ford
02-03-2012, 02:09 PM
we have a 331 out of a 1995 mustang cobra for sale here are the specs and sopme picturs.
do not include headers,intake,front cover,water pump,oil fileter adapter, .
Rotating assembly
Scat forged steel crank (3.250)
Scat forged steel h-beam rods (5.400)
J&E .040 over forged dished (-26cc) blower pistons and rings (900 set!)
Clevite 77 H-series performance bearings
$2200
Cam and valvetrain
Custom blower grind camshaft from Cam Research (they only do Fords)
550 lift, 285 adv duration, 228 duration @ 050, 112 centerline
with matching performance valvetrain
1.6 rollers, hardened pushrods, springs, seats etc
$600
Heads
GT40 iron heads (NOT the P-head)
ported and polished with 3 angle valve job
210cfm intake 160cfm exhaust (have flow numbers)
angled pugs – no header interference
64cc combustion chambers
1.84 / 1.54 valves
$1000 (500 for port work plus 500 for the heads themselves)
485 hp and tq to the wheels with a Vortech (have dyno sheet)
Blower heaven at aprox 8.2:1 compression
Aprox 5k miles since build
Stock redline
Cost to build this motor as we’re selling it is over $6000
asking 3000.00
do not include headers,intake,front cover,water pump,oil fileter adapter, .
Rotating assembly
Scat forged steel crank (3.250)
Scat forged steel h-beam rods (5.400)
J&E .040 over forged dished (-26cc) blower pistons and rings (900 set!)
Clevite 77 H-series performance bearings
$2200
Cam and valvetrain
Custom blower grind camshaft from Cam Research (they only do Fords)
550 lift, 285 adv duration, 228 duration @ 050, 112 centerline
with matching performance valvetrain
1.6 rollers, hardened pushrods, springs, seats etc
$600
Heads
GT40 iron heads (NOT the P-head)
ported and polished with 3 angle valve job
210cfm intake 160cfm exhaust (have flow numbers)
angled pugs – no header interference
64cc combustion chambers
1.84 / 1.54 valves
$1000 (500 for port work plus 500 for the heads themselves)
485 hp and tq to the wheels with a Vortech (have dyno sheet)
Blower heaven at aprox 8.2:1 compression
Aprox 5k miles since build
Stock redline
Cost to build this motor as we’re selling it is over $6000
asking 3000.00